| Customization: | Available |
|---|---|
| Type: | Hydraulic Pipe and Tube Bending Machine |
| Automation: | Automatic |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hydraulic Metal Tube Pipe Profile Bending Machine Rolling Bender
cnc machine rolling hydraulic bending machine steel bending machine profile rolling machine hydraulic bender
cnc profile rolling machine hydraulic bender steel pipe rolling machine stainless steel rolling pipe bending machine
W24Y Hydraulic stainless steel pipes tubes and profile and section rolling bending machine
Product Description
1. Rolls are hardened & made from high quality steel .
2. Drive shafts are hardened and ground with double taper roller bearing support .
3. Machine can be set up in horizontal or vertical working position .
4. Hydraulic lateral angle guide rolls ,Double pinch hydraulic forming rolls .
5. Dual adjustable lateral guidesRolls are driven via 3 separate hydraulic motorLower rolls hydraulic moveable up and down .
6. Perfectly complete pre-bending,rolled-up,roll calibrate .
7. Three rollers are powered .Working principle: two down rollers as main driving roller,or all three rollers as main driving roller,with upper roller fixed and two down rollers do up-and-town movement around one fixed center.Triple geared drive,low voltage driver,low current consumption and high efficiency.Well hydraulic control,displacement liquid-crystal display with accuracy+_0.1mm .
8. The two touch steel stick can permit the good finishing quality of asymmetric plate section bending .
9. Advanced and compact structure with full function.
10. The machine has six oil tanks(two big oil tanks,four small oil tanks),and the head is vertically.The yield strength bended profile with 250Mpa (Max.).
11. Full function,complicated structure,high precision and very stronger.
12. Roving foot pedal control with emergency stop .
Technical parameter
| Model&spec. | W24S-6 | W24S-16 | W24S-30 | W24S-45 | W24S-75 | W24S-100 | W24S-140 | |
| Max bending modulus of section (cm3) | 6 | 16 | 30 | 45 | 75 | 100 | 140 | |
| Bending speed(m/min) | 5.5 | 5.5 | 5.5 | 5.5 | 5 | 5 | 5 | |
| yield limit of material (MPa) | 245 | 245 | 245 | 245 | 245 | 245 | 245 | |
| inward bending of angle steel | The max cross section (mm) | 50×5 | 80×8 | 90×10 | 100×10 | 120×12 | 140×16 | 150×16 |
| The min bending diameter (mm) | 800 | 1000 | 1200 | 1500 | 2000 | 2500 | 2400 | |
| The min cross section (mm) | 20×3 | 30×3 | 35×3 | 36×5 | 38×4 | 40×5 | 50×5 | |
| The min bending diameter (mm) | 400 | 550 | 560 | 600 | 600 | 720 | 1000 | |
| outward bending of angle steel | The max cross section (mm) | 50×5 | 80×8 | 90×10 | 100×10 | 120×12 | 140×16 | 150×16 |
| The min bending diameter (mm) | 800 | 1000 | 1100 | 1300 | 1600 | 1800 | 2200 | |
| The min cross section (mm) | 20×3 | 30×3 | 35×3 | 36×5 | 38×4 | 45×5 | 50×5 | |
| The min bending diameter (mm) | 400 | 550 | 500 | 600 | 700 | 760 | 400 | |
| outward bending of channel steel | channel steel model | 8 | 12 | 16 | 20 | 25 | 28 | 30 |
| The min bending diameter (mm) | 600 | 800 | 800 | 1000 | 1100 | 1100 | 1200 | |
| inward bending of channel steel | channel steel model | 8 | 12 | 16 | 20 | 25 | 28 | 30 |
| The min bending radius (mm) | 700 | 900 | 1000 | 1150 | 1600 | 1700 | 1700 | |
| plane bending of flat steel | The max cross section (mm) | 100×18 | 150×25 | 180×25 | 200×30 | 220×40 | 250×40 | 280×50 |
| The min bending diameter (mm) | 600 | 700 | 800 | 900 | 1000 | 1200 | 1300 | |
| vertical bending of flat steel | The max cross section (mm) | 50×12 | 75×16 | 90×20 | 100×25 | 110×40 | 120×40 | 150×40 |
| The min bending diameter (mm) | 500 | 760 | 800 | 1000 | 1100 | 1300 | 1500 | |
| bending of round pipe | The max cross section (mm) | 42×4 | 76×4.5 | 89×5 | 89×8 | 114×5 | 159×5 | 168×6 |
| The min bending diameter (mm) | 500 | 750 | 900 | 900 | 1200 | 2000 | 2000 | |
| bending of round bar | The max cross section (mm) | 38 | 52 | 62 | 75 | 85 | 90 | 100 |
| The min bending diameter (mm) | 450 | 600 | 600 | 800 | 100 | 1100 | 1200 | |
| bending of square pipe | The max cross section (mm) | 45×3 | 60×4 | 70×4 | 80×6 | 90×8 | 100×10 | 125×10 |
| The min bending diameter (mm) | 750 | 900 | 1000 | 1200 | 1600 | 2000 | 2500 | |
){kind=link}